KAUTEX 

Showing 1 - 10 of 10 items
  • Para ángulos de transporte elevados, recomendamos el uso de la Banda N25, con un taco de 25 mm de altura, según diseño inferior. Este tipo de bandas está formado por un núcleo textil de tejido EP, (El poliéster en sentido urdimbre y (13] nylon en sentido trama, de dos o tres capas y cubiertas exteriores de caucho resistente a la abrasión y al ozono,...
  • Las bandas textiles son las de uso más común. Están constituidas por varias capas de tejidos engomados, recubiertas por capas de goma del espesor y calidad deseadas según el trabajo a realizar y el tipo de material a transportar. El tejido está constituido por la urdimbre y por la trama. La urdimbre es la encargada de soportar los esfuerzos de tracción...
  • When a greater inclination is needed to carry solid material, anywhere between 20º and 45º, the outer cover should not be flat. Chevron belts are recommended for such cases, with edges and V-shaped cleats, as the holding capacity is greater.   Fields of application Chevron belts with a textile carcass have numerous industrial uses, among which we could...
  • For uses that require the same characteristics as textile belts but in addition great resistance to impact and cutting, Kauman recommends using the anti-cut NoRip conveyor belt. This is a multi-layer textile belt with a textile or steel breaker inserted into the top cover.   It is the ideal solution when the following is required:  -High resistance to...
  •  When a greater inclination is needed to carry solid material, anywhere between 20º and 45º, the outer cover should not be flat. Chevron belts are recommended for such cases, with edges and V-shaped cleats, as the holding capacity is greater.   Fields of application  Chevron belts with a textile carcass have numerous industrial uses, among which we could...
  • For multiple conveyors with moderate inclinations, up to 25 or 30%, depending on the material to be conveyed, the granulometry, the shape of the material and the angle of inclination, the most appropriate belt is the Chevron KS15, whose cleats are 15 mm high, straight and inclined 55º in relation to the conveyor axis.  It only has central cleats so that...
  • For high conveying angles, we would recommend using the“N25” conveyor, which has blocks 25 mm high. This kind of belt is made of an EP textile core, (E) polyester warp and (P) nylon weft, with two or three layers and outer covers made of rubber resistant to abrasion and ozone, suitable for working in the open air.  The construction of this kind of belt...
  • For materials of low granulometry and high inclination angles, the recommended conveyor belt would be the Chevron with 32 mm blocks. The usual angles of inclination are between 30º and 45º, considering that greater inclinations require less conveying length, while the recommended trough angle is 10º for materials that move easily and 20º for stickier...
  • For certain specific uses of inclined conveying, on belts that are 1,200 mm wide, we have a special mould that enables drainage if working in the open air or with wet materials.
  • The “N7” conveyor belt is specially designed to carry wooden chips, and so it is in general moderately resistant to vegetable oils, although other qualities are available on request.
Showing 1 - 10 of 10 items

Menu

Top