BANDS SPECIALISTS
CONVEYOR SINCE 1983

Textile conveyor belts are the most commonly used. They are made up of several layers of rubberized fabrics, covered by layers of rubber of the desired thickness and quality depending on the work to be carried out and the type of material to be transported.

For belt applications which require minimum elongation, maximum flexibility, high resistance to impact and tearing, in the medium and high range of resistance, the use of KAUFLEX belts is recommended, with a FLEXIMATR steel mesh carcass.

KAUSTEEL belts are the perfect solution for covering long distances, bearing high tension and conveying heavier loads. Given their reduced elongation (close to 0.3%) and high resistance to impact, KAUSTEEL is ideal for an installation measuring several kilometres.

KAUSTRONG is a conveyor belt that is highly resistant to breakage, impact and longitudinal cuts; it is high-resistance belt.

Kauman recommends the use of KAUCENTERbelts for facilities that require the qualities provided by KAUTEXR or KAUFLEXR belts and also the need to reduce the risk of the belt decentring.

There are various different options when using a conveyor belt as a bucket elevator, depending on the facility.

Conveyor belt with corrugated sidewall and transversal cleats KAUBORD consists of a base belt, to which two sidewalls made of hot-vulcanized corrugated rubber are added on the edges, providing security, stability and durability. They can also include transversal rubber cleats, also fixed to the base belt and the sidewalls.

COVERKAU belts are used to protect a carrying element placed below the belt. Its protective function is due to its extraordinarily rigid weft, facilitating the loading and unloading of the element carried underneath thanks to its excellent longitudinal flexibility.

KAUFORT conveyor belts with an Aramid carcass compete directly with steel cord belts as their characteristics are similar in mechanical resistance and elongation.

Rought top conveyor belts with a textile carcass. KAUROUGH belts are suitable for carrying manufactured products, baggage, parcels, sacks etc. both horizontally and inclined. Its rough surface gives it a great coefficient of friction with the product carried, and absorbs any possible impact or vibration.

Transversally rigid conveyor belt. KAURIGID conveyor belts are ideal for uses that require transversal rigidity with the belt flat in use, such as belts with undulated sidewalls and cleats. These belts are supported on the return side thanks to the additional rigidity. This is achieved by means of the use of special monofilament fabrics and an increased thickness of the rubber between the fabrics, or by a transversal steel reinforcement. The belts are made in standard quality, and on request can be made in special qualities (antiflame, antioil, white and others). The edges can be cut or sealed.