Kautex Chevron N32
For materials of low granulometry and high inclination angles, the recommended conveyor belt would be the Chevron with 32 mm blocks.
The usual angles of inclination are between 30º and 45º, considering that greater inclinations require less conveying length, while the recommended trough angle is 10º for materials that move easily and 20º for stickier materials.
There is a little opening of 10 mm between the cleats in the middle of the belt so that water can drain off.
There is a little opening of 10 mm between the cleats in the middle of the belt so that water can drain off.
For materials of low granulometry and high inclination angles